magna-MODELS v2027
Table of Contents
m-3DP
Gridfinity Catalog
Catalog and Tools for the Gridfinity 3D Printable modular, open-source grid storage system.
Gridfinity Pad
Gridfinity “pads” in individual IntelliShapes. Copy all features in 42mm increments. Use as a starting base to develop your own storage designs.
Gridfinity Groove
This is a subtractive IntelliShape that when dropped onto a surface will generate the Gridfinity groove to the specs needed to be used with the Gridfinity bases. The shape extends through part in both directions. You can edit as needed. This shape should only used when your units are set to millimeters (mm). You can copy/linkj this shape in 42mm increments as mandatred by the Gridfinity specs.
m-ESTIMATOR
\ TERM Licenses
This a Sub-Group includes all the rental options currently available.
m-FURNITURE
General Announcements
These new components have been added to the KITCHEN sub-group within the catalog.
L Counter Top
L-Shaped Countertop that can be dropped on top of cabinets and resized as needed. The green dot indications where the anchor is and drop point.
DESK_007
a parametric and constaint desk where editing the table top profile dimensions updates the size of desk. You can adjuts the height of the legs as well with traditional handles.
Fernon Dining Table
Fernon Dining Table from Wayfarer. Attachment link to supplier website.
m-LUMBER
General Announcements
Millwork. With this release we have started to implement components and tools aimed at the Millwork Industry. We have been getting enough requests to start adding these types of components to our Magna-MODELS. We will continue to expand on this industry in future releases.
French Cleat
The French Cleat has been added as a variant model with nominal thicknesses; 3/8 (.34), 1/2″ (.47), 3/4″ (.72). You can adjust the length of the cleat via the H sizebox handle.
P-LAM
A variant model of common laminated plywood sheets. The sizes are set to the full scale to use for conceptualizing designs in round numbers. However you can edit to put the actual dimensions of the lumber if desired.
Wood Biscuit
Wood Joining Biscuit commonly used in woodworking. A variant model in the following sizes: #FF, #0, #10, #20. Thickness set to .125″ for all. Quick Parameter access to edit thickness value on-demand.
Sheppard Bracket
A Variant model of a Sheppard Bracket used in the installation of “Floating Shelves”. This model has all the avialable variations for 1-1/2″ plate SB from 10″W thru 82″W. Also included is a webhook to manufacturer website and Quick Parameters.
The Quick Parameters allow you toedit the values on demand for:
• Plate Thickness
• Plate Height
• Rod Diameter
Euro Hinge Hole
A dimension driven Hole setup for common European Hinge Holes. Edit the dimensions to suit your specific hinge specifications.
../HATCHES
Added are some common ANSI hatch pattem images that can be dropped onto your 3D models in any mode: Part, IntelliShape or Face. Typically the FACE mode is most common to include “sections”.
../TEXTURES
Added are some common ANSI hatch pattem images that can be dropped onto your 3D
models in any mode: Part, IntelliShape or Face. Typically the FACE mode is most
common to include “sections”.
Tenon Full (Enhanced)
The Full Tenon has been overhauled to be more easy to use and more productive. The feature is not extremely to edit the sizing of the tenon as well control the offset cutting size for larger materials.
Tenon (Enhanced)
We have replaced the design variations in previous release in exchange for Quick Parameters. The decesion was made that this works easier and allows for more customn value editing on demand.
Half Lap (Enhanced)
We updated the Halp Lap so the cutting plane always remains centered on the part. Also made the SHAPE handles on by default for faster editing.
m-RESOURCES
• Removed the “Steps Recorder” tool since Microsoft has discontinued.
• Removed all the PDF flyers and brochure urls.
ICO Converter
Free online utility to convert images to .ico files that can be used to generate your own icons for your desktop or IronCAD catalog interface.
m-SHAPES
We decided to remove all url links to third party sites since many go defunct or moved and hence the links are consistently broken. So no more url links to third party sites unless known stability exists.
../ADD - L
L-Shaped additive Intellishape
../ADD - Half Cylinder
A cylinder that has been cut in half. This Intellishape can be resized symmetrical for the diameter .
Watch video to see the difference between the “Half Cylinder” and “Half Moon”
../DECORATIVE - IC I-Beam
IronCAD’s Icon
m-STUDIOS
Retail Shoes
An enviroment based around retail sneakers such as Addidas.
m-TITLE
../BORDERS - BORDER-C-Basic
Simple C Size border.
../BORDERS - C-003
C size border with vertical left side titleblock.
m-TOOLS
C 10 x 8 x D4
Structural C-Channel based on standard dimensions.
C 10 x 6 x D5
Structural C-Channel based on standard dimensions.
../PIPE - Jogged Pipe
a Jogged Pipe variant model designed to mate up misaligned pipe sections. Sizes range from 1/8″ pipe to 6″ pipe all schedule 40. Note the pipes must be on the same planar axis for this tool to work.
To Do: Drop onto existing pipe or scene and edit Guide Curve to modify the geometry.
../UTILITIES - Arch. Scale Calc.
A custom Architectural Scale Calculator designed to help you get the correct decimal equivalent value for our views in DRAFT portion of your IronCAD program.
ENHANCED...
- Added Quick Parameter Display to all the tools that can accommodate this new feature.
- ../ARCH – Floor Plans have a Quick Parameter Display has been added to quickly modify “Ceiling Height”. Refreshed colors for better clarity and contrast when designing.
Datum Snap Block
Has been enhanced for better snapping references as well as updated the XYZ color matching for better visual feedback.
../TUBE - Tube Polycarbonate
Replaced the Design Variations with the “Quick Parameter” pop-up dialog. Renamed Part name and cleaned up intellishape box.
../TUBE - Tube Aluminum
Added “L1” attachment points to be used with the standard “Tube L” component for enhanced SmartAssembly capabilities.
../TUBE - Tube L
Added “L1” attachment points to be used with the standard “Tube Aluminum” component for enhanced SmartAssembly capabilities. Also added Quick Parameter tool for the bend radius and both leg lengths.
